You have no items in your shopping cart
The special CCTV switches from Hikvision are designed to optimally set up your network.
CCTV switches are equipped with a built-in range extender, giving you no less than 250m range with your PoE power supply! You reach these distances by using CAT6 cabling.
In addition, the switches are equipped with a 4kV surge protection. Because cameras are often mounted outdoors, it is very important that the switch does not short-circuit due to an over voltage on one of the cables and that your camera network is down.
A buffer is required to properly process all data packages from your camera without losing packages. Hikvision CCTV switches have a buffer for this, which means that the switch is optimally equipped to transfer camera images to the recorder without loss.
|PoE Port:||4, 10 / 100Mbps RJ45 ports|
|Uplink Port:||1, 100M Ethernet Port|
|Network Protocol:||IEEE802.3.802.3u, 802.3x, 802.3af, 802.3at|
|Max Forwarding Rate:||0.74Mpps|
|High Priority Ports:||Port 1|
|Forwarding Mode:||Store and forward|
|MAC Address Table:||1k|
|Flow Control:||IEEE802.3x full duplex|
|Power Over Ethernet|
|PoE Standard:||IEEE802.3af, IEEE802.3at|
|PoE Power Budget:||58W|
|Working Mode:||Extend On: 250m, 10M, CAT 5th
Extend Off: 100m
|Power Supply:||51V DC, 1.25A|
|Working Temperature:||Temperature: 0 40 -40 ℃|
|Working Humidity:||Humidity: 10% -90%, non-condensing|
|Storage Temperature:||Temperature: -40 ℃ -70 ℃|
|Storage Humidity:||Humidity: 5% -90%, non-condensing|
|Dimension:||132 mm * 93.3 mm * 27.6 mm|