Do you want a SIM card in this alarm system? Then pay attention:

Hub Plus

Second-generation intelligent control panel with four communication channels, a new high-performance processor, triple RAM capacity and double flash memory capacity. The Hub Plus monitors the operation of all Ajax detectors and immediately alerts the owner and the security company.

Uses Wi-Fi, Ethernet, WCDMA and GSM to send alarms to the Central Monitoring Station and the system owner
Sends a notification in the event of a power failure and works for up to 16 hours after battery backup
Checks detector functionality at least every 12 seconds

Characteristics

• Authentication to prevent counterfeiting
• Jamming detection and communication channels encryption
• Tamper alarm
  
  

Protects large areas

The Hub Plus is designed to protect large facilities with a large number of rooms and people. New powerful processor and increased memory capacity have expanded the capabilities of the control panel: up to 150 detectors and 50 cameras can be connected to the Hub and you can add 50 users and create 25 groups for room security management.

• For house and apartment
• for office
• For shop and cafeteria

Uses all possible alarm transmission methods

The Hub Plus is the absolute leader in the number of communication channels: the control panel can be connected to the Internet via Wi-Fi, Ethernet, WCDMA and GSM. Together, these features provide an ultra-stable connection and instant alarm transmission to the owner's smartphone and the Central Monitoring Station.

• Alarms via calls, SMS and push notifications
• Synchronized operation of all communication channels
• Direct connection to central measuring stations

Increases stability by 4 times

The Hub Plus is equipped with a GSM module with two SIM card slots that support 2G and 3G networks. Now you can use SIM cards from two different communication providers without any risk of communication failure. The Hub instantly switches between 2G and 3G networks. If one SIM card does not respond, the second will be activated automatically.

Improved reliability

The Hub Plus makes it possible to use a redundant Internet connection by connecting the central unit to networks of two independent communication providers: the main - via Ethernet and the backup - via Wi-Fi. If a provider's connection fails, the hub stays connected and continues to monitor the situation on the site.

Simplifies installation and configuration

The Hub Plus now has a Wi-Fi module, so there is no need to run a cable to connect to the router. The control panel is immediately ready for use. It is set up using the mobile application and the detectors are connected with just one click. The device can be mounted in just a few minutes using the SmartBracket holder.

Product Info

Simplifies installation and configuration

The Hub Plus now has a Wi-Fi module, so there is no need to run a cable to connect to the router. The control panel is immediately ready for use. It is set up using the mobile application and the detectors are connected with just one click. The device can be mounted in just a few minutes using the SmartBracket holder.