AJAX Hub 2

• Manages the security system with visual alarm verifications.
• Sends photos from MotionCam detectors.
• Automatically reports the emergency center.
• Full system control in one app.
• Communicates via 3 independent channels.

Control over security, not your privacy

Hub 2 manages all Ajax devices in the system to warn users of open doors, broken windows, fire hazard and flooding. If burglars enter your home, Hub 2 sends photos from the MotionCam detectors and alerts the alarm about the danger. You don't have to live under the constant surveillance of the security cameras to know what's going on.

Stress-free

The motion detectors respond to dangerous situations and simple mistakes. A nanny can take the kids home from school and forget to turn off the security system, which will raise the alarm. With Hub 2, you don't have to worry in those cases and waste money on the fines for false alarms. Open an alarm sent by the MotionCam detector to see what happened.

Always in touch

Hub 2 central panel uses Ethernet or one of the 2 SIM cards to ensure the delivery of the alarms and photos of the protected objects. The channels work in parallel and support each other in an emergency.

• Compression and transmission protocols guarantee lightning-fast delivery of the photo series, even with a weak internet connection. Unlike the video camera streams, Ajax allows you to evaluate the situation on the protected objects with the internet speed of 0.5 kB / s.
• Uses 3 independent communication channels
• Provides alarms in 0.15 seconds
• Sends photo confirmations even on 2G

Problem resistant

With Hub 2, you know immediately if the detector has a fault, if someone has removed it, if it has been damaged or if the housing is open. Even if the lights suddenly go out, the console will continue its watch powered by a backup battery.

• Checks the functionality of detectors at least every 12 seconds
• Alerts about threats, channel interference, or outages
• Operates up to 4pm during a blackout

Evolves with every software update

Hub 2 runs on OS Malevich, a real-time operating system. This type of software is used in the systems that cannot afford errors, for example spaceships and ballistic missile launchers or car brakes.
OS Malevich is immune to viruses and protected against cyber attacks. Thanks to the architecture, we can regularly expand the Ajax possibilities wirelessly without disturbing the users.

• Protected against cyber attacks
• Improved functionality with every system update
• Automatically updates wirelessly

Jeweler

Hub 2 central panel communicates with the security systems using radio frequencies at a distance of up to 2000 m.
The Jeweler bidirectional radio protocol encrypts all transmitted data. And in case of malfunction or failure, Ajax switches the frequency and alerts you as well as the alarm company.

• Coverage area up to 2000 m
• Two-way radio communication
• Encryption with a custom AES algorithm
• Frequency hopping

Wings

For MotionCams parallel visual data transmission, Hub 2 uses the Ajax Wings radio protocol. It is a high-speed protocol based on Jeweler technology. Wings received its best features. It also uses a special antenna to improve channel reliability.
Wings guarantees the delivery of photo confirmations even if the signal level is unstable. It uses the built-in algorithms of packet check and re-upload.

• Transfer of the animated series
• Communication via additional antenna
• Guaranteed data delivery

Easy to Install

It only takes a few minutes to install Hub 2. Connect to the Internet and plug in the power cord. Then scan the QR code with the Ajax app. In most cases, no additional tuning is required for your devices. Hub 2 starts working online once.

1. Download the free app
2. Scan the QR code
3. Operation all over the world

Differences

Also take a look at the manual!

Instruction manual