Jablotron

This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be di...

This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be divided into two independent bus branches by disconnecting jumpers.

Temperature sensor with a cable for the temperature measurement of gaseous, liquid and solid substances in the range fro...

Temperature sensor with a cable for the temperature measurement of gaseous, liquid and solid substances in the range from –50 °C to +200 °C. Can be used as an external temperature sensor for the products: – JB-EXT-TH-R – JB-EXT-TH-B

LD-81| Water overflow detector

The Jablotron JS-25 COMBO is a two-in-one detector. It is combined with 2 sensors (PIR & glass break) in a housing with ...

The Jablotron JS-25 COMBO is a two-in-one detector. It is combined with 2 sensors (PIR & glass break) in a housing with excellent RF immunity. It offers three independent outputs (PIR alarm, glass break alarm and tamper).

An oversized version of the installation box for Jablotron modules, equipped with a front and a rear tamper switch. Suit...

An oversized version of the installation box for Jablotron modules, equipped with a front and a rear tamper switch. Suitable for input and output modules, nodes etc.

An external rod antenna with a magnetic base to improve the signal of devices using 2G and 3G GSM networks.

The JA-111H TRB module is designed to connect any wired detector (with contact or pulse outputs) to the JABLOTRON 100 sy...

The JA-111H TRB module is designed to connect any wired detector (with contact or pulse outputs) to the JABLOTRON 100 system and provides power. This installation module can be integrated directly into the detector.

The Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system. The module communicates a ...

The Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system. The module communicates a being fed by BUS from the control panel.

Jablotron SD test Smoke detector tester, for manual testing of the smoke detector. With telescopic spraying for even dis...

Jablotron SD test Smoke detector tester, for manual testing of the smoke detector. With telescopic spraying for even distribution of smoke.

The Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG outpu...

The Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED. It is connected to the control panel by means of a BUS.

JA-111M-GR BUS magnetic detector mini grey

JA-111M-AN BUS magnetic detector mini anthracite

The Jablotron JA-111MB magnetic detector mini is designed for the detection of windows or doorways. It has a unique smal...

The Jablotron JA-111MB magnetic detector mini is designed for the detection of windows or doorways. It has a unique small design suitable for residential or commercial installations.

The Jablotron JA-111M magnetic detector mini is designed for the detection of windows or doorways. It has a unique small...

The Jablotron JA-111M magnetic detector mini is designed for the detection of windows or doorways. It has a unique small design suitable for residential or commercial installations.

Jablotron Bat-3V6-R20 lithium battery, LSH20 for the JA-150IR and JA-180IR external detectors.

Maintenance-free rechargeable lead-calsium SA-214-7Ah battery, suitable for JA-83K and JA-106.

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62...

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62 x 38 x 20 mm Outside dimensions: 70 x 62 x 35 mm

The Jablotron JA-110Z Connection Module is designed for branching the bus of the JABLOTRON 100 system. It is protected a...

The Jablotron JA-110Z Connection Module is designed for branching the bus of the JABLOTRON 100 system. It is protected against attack by a pair of tamper contacts. It is supplied in a suitable JA-190PL flush-mounted box. The contact mod...

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W ...

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system.

Jablotron SA-220 roller door magnetic contact with floor contact. Wired magnetic contact specially designed for roller d...

Jablotron SA-220 roller door magnetic contact with floor contact. Wired magnetic contact specially designed for roller doors, garage doors, etc.

JA-112M, Bus module for magnetic contacts, 2 inputs

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W...

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system. The mod...

Adapter for connecting the actuator JB-150N-HEAD to a radiator valve. The package contains 5 adapters.

The JA-112j bus wall button is designed to trigger a panic alarm or to control the PG outputs (freely programmable outpu...

The JA-112j bus wall button is designed to trigger a panic alarm or to control the PG outputs (freely programmable outputs). The JA-112J has two buttons and an indication LED, which when the button is pressed when switching on or off...