Product description

Hikvision DS-2TD1217B-3/PA(B) thermal imaging camera turret 3mm

Using a thermal imaging camera is ideal for detecting fever or flu in your employees or customers. With a Hikvision thermal imaging camera turret, with a viewing angle of 90 °C you can easily detect temperature increases with up to 30 people at the same time. The Hikvision thermal imaging camera turret measures accurately to a deviation of approximately 0.3 °C using a Blackbody, a calibration device in a black housing. Without a Blackbody, it measures accurately to about 0.5°C. The device is dust and moisture resistant and has an audio and alarm notification. This way you are immediately informed if someone with a lift comes past the camera.

Hikvision thermal imaging camera turret advantages

Accurately measures up to ±0.3°C deviations with Blackbody
Provides an audio and alarm notification when a temperature increase is detected
Detection on up to 30 people at the same time

Install Hikvision thermal imaging camera turret

You can install the Hikvision thermal imaging camera turret on the ceiling or easily attach it to a tripod. Install the thermal imaging camera turret at a height of 2 meters. Do you also want to use a Blackbody? You should attach this to a tripod at a distance of 1.5 meters from the camera and at the same height as the camera for an accurate measurement. Make sure to use the turret indoors only in a wind-free environment. Before use, the camera needs to warm up for 90 minutes.

Buy Hikvision thermal imaging camera turret

Because the Hikvision thermal imaging camera turret can scan up to 30 people at the same time, this model is ideal if there is a lot of traffic in your company. This allows you to efficiently check for elevated temperatures within your company. Looking for another variant of thermal camera surveillance? View the range of fever detection cameras from Alarm System Expert!