You have no items in your shopping cart
Hikvision's special CCTV switches are designed to optimally set up your network.
CCTV switches are equipped with a built-in range extender, giving you no less than 250m range with your PoE power supply! Suitable for PoE and PoE + cameras.
In addition, the switches are equipped with a 4kV surge protection. Because cameras are often mounted outside, it is very important that the switch does not short circuit one of the cables due to an overvoltage and that your camera network is shut down.
A buffer is required to properly process all data packets on your camera without loss of packets. Hikvision CCTV switches have a buffer for this, making the switch optimally equipped to transfer camera images to the recorder without loss.
|PoE Port:||4.10 / 100Mbps RJ45 ports|
|Uplink Port:||1, 100M Ethernet Port|
|Network Protocol:||IEEE802.3,802.3u, 802.3x, 802.3af, 802.3at|
|Max. Forwarding Rate:||0.74Mpps|
|High Priority Ports:||Port 1|
|MAC Address Table:||1k|
|Flow Control:||IEEE802.3x full duplex|
|Power Over Ethernet|
|PoE Standard:||IEEE802.3af, IEEE802.3at|
|PoE Power Budget:||58W|
|Working Mode:||Extend On: 250m, 10M, CAT 5e
Extend Off: 100m
|Power Supply:||51V DC, 1.25A|
|Working Temperature:||Temperature: 0 ℃ -40 ℃|
|Working Humidity:||Humidity: 10% -90%, non-condensing|
|Storage Temperature:||Temperature: -40 ℃ -70 ℃|
|Storage Humidity:||Humidity: 5% -90%, non-condensing|
|Dimension:||132mm * 93.3mm * 27.6mm|
Het apparaat werk zoals verwacht!