ASE0109P-E / M, 9 port switch (8 PoE / PoE +, 1 Uplink), 250 meter PoE range
These special CCTV switches from the Hikvision factory are designed to optimally set up your network. The CCTV switches are equipped with a built-in range extender, giving you no less than 250m range with your PoE power supply! Supports PoE and PoE + cameras.
In addition, the switches are equipped with a 4kV surge protection. Because cameras are often mounted outside, it is very important that the switch does not short circuit one of the cables due to an overvoltage and that your camera network is shut down.
A buffer is required to properly process all data packets on your camera without loss of packets. Hikvision CCTV switches have a buffer for this, making the switch optimally equipped to transfer camera images to the recorder without loss.
- 8 PoE ports + 1 network port
- 123W PoE budget
- 1.25 Mbits RAM Data Buffer
- 4 kV surge protection
ASE0109P-E / M
Network Ports: 9
Standard Network Protocol
IEEE802.3,802.3u, 802.3x, 802.3af, 802.3at
Switching Capacity: 1.8Gbps
Uplink Port 100M Ethernet Port: 1
Max. Forwarding Rate: 1.34Mpps
High Priority Ports Ports: 1-2
Forwarding Mode: Store-and-forward
MAC Address Table: 4k
Flow Control: IEEE802.3x full duplex
Power Over Ethernet
PoE Port: 8
PoE Standard: 802.3af, 802.3at
PoE Power Budget: 123W
Working Mode: Supports 8 pins powering
Power Supply: 51V DC, 2.5A
Power Consumption: ≤127W
Surge Protection: 4KV
Working Temperature Temperature: 0? -40?
Working Humidity: 10% -90%, non-condensing
Storage Temperature: -40? -70?
Storage Humidity: 5% -90%, non-condensing
Dimension: 235mm * 103mm * 27mm