You have no items in your shopping cart
Hikvision internal ceiling PIR detector is intended for mounting indoors, in locations such as living room, kitchen, hallway, bedroom or for use in office buildings. This ceiling detector is ideal for rooms that do not have a square or rectangular shape, but also very suitable for large rooms due to its huge detection area.
Model number DS-PDCL12-EG2-WE, the PIR Ceiling Detector is a fully secure, two-way wireless detector with motion detection, tamper protection, low battery check and link check. It can work for up to 5 years from a built-in battery. It ignores animals while recognizing humans from the first step.
The Hikvision internal PIR ceiling detector can monitor an area of 12 meters from the sensor for movement in a 360 degree field. If you place the detector in the middle of a room, the room may therefore be 24 by 24 meters in size. The detector can view 12 meters on each side. The sensor divides the area into no less than 172 zones and gives an alarm if 1 or more zones detect a movement. This sensitivity is adjustable via the Hik-Connect application on your smartphone. There are a total of 3 modes, high sensitivity, normal and animal friendly. The latter should be selected if there are cats or dogs in the area to be secured. Pets up to 30KG are not detected in this position.
The range from the Hub to the ceiling detector DS-PDCL12-EG2-WE is 1,600 meters in open field. The connection is continuously monitored by the Hikvision Cloud. If the wireless signal is intentionally disrupted, this will be reported immediately via the Hik-Connect app on your smartphone. The wireless Hikvision signal is called Tri-X, and it works on 2 different frequencies in the 868mhz band and has AES-128 encryption.
The ideal height to mount the PIR ceiling detector is between 2.4 meters and 4.0 meters high. You are therefore very flexible in mounting this detector. It is therefore also ideally suited for homes with very high ceilings. The installation of the ceiling detector is easy to do yourself. Of course, all installation supplies are included.
All Hikvision products are easy to connect. Signing up is done with a QR code on every device. It is even easier if you activate the “Enroll” function in the Hub settings of the Hik-connect app. All you then have to do to connect a detector is turn it on, and the connection between Hub and detector is ready. It can't get any simpler than this.
Like all Hikvision products of the AX Pro alarm system, the ceiling detector works on batteries of the type CR123A and therefore completely wireless. They are therefore easy to place anywhere without having to lay cables. The life of the standard batteries supplied is 5 years under normal use. After this time, they can easily be replaced for new ones for a few euros. These batteries are always available from stock. You can find out how to replace the batteries in the manual of the internal PIR ceiling detector DS-PDCL12-EG2-WE.
Detection method: Passive infrared
Detection range: 12 meters
Detection angle: 360 degrees
Detection zones: 172
detectable speed: 0.3 to 2m/s
White Light Filter: 6500lux
Support digital temperature compensation, even in ambient temperatures of about 37 degrees good detection of human body
Protects both front and back against sabotage
Signal strength indicator
Transmission frequency 868MHz
Transmission Security AES-128 encryption
Transmission range (free space) 1.6Km
Frequency Hopping Support
Standard battery life: 5 years in working state (if activated 20 times per day)
Battery type CR123A × 1
Operating temperature -10 °C to 55 °C (14 °F to 131 °F)
Humidity: 10% to 90%
Dimensions: 101.2 mm diameter and 32.9 mm high
Mounting height: 2.4 to 4 m
Fixing method: Ceiling
Application scenario: Indoor spaces