Hikvision's special CCTV switches are designed to optimally set up your network.
CCTV switches are equipped with a built-in range extender so that you have a range of up to 250m with your PoE power supply! You achieve these distances by using CAT6 cabling.



In addition, the switches are equipped with a 4kV surge protection. Because cameras are often mounted outside, it is very important that the switch does not short circuit one of the cables due to an overvoltage and flatten your camera network.

A buffer is necessary to properly process all data packets from your camera without losing packets. Hikvision CCTV switches have a buffer for this, so that the switch is optimally set up to transfer camera images to the recorder without loss.

- 8 PoE ports + 1 network port
- 123W PoE budget
- 1.25 Mbits RAM Data Buffer
- 4 kV surge protection

 

Fashion model
DS-3E0109P-E
Ports
Network Ports: 9
Standard Network Protocol
IEEE802.3,802.3u,802.3x,802.3af,802.3at
Performance
Switching Capacity: 1.8Gbps
Uplink Port 100M Ethernet Port: 1
Max. Forwarding Rate: 1.34Mpps
High Priority Ports Ports: 1-2
Forwarding Mode: Store-and-forward
MAC Address Table: 4k
Flow Control: IEEE802.3x full duplex
Power Over Ethernet
PoE Port: 8
PoE Standard: 802.3af, 802.3at
PoE Power Budget: 123W
Working Mode: Supports 8 pins powering
General
Power Supply: 51V DC, 2.5A
Power Consumption: ≤127W
Surge Protection: 4KV
Working Temperature Temperature: 0?-40?
Working Humidity: 10%-90% , non-condensing
Storage Temperature: -40?-70?
Storage Humidity: 5%-90% , non-condensing
Weight: 0.57kg
Dimension: 235mm*103mm*27mm