You have no items in your shopping cart

JA-112P, Pro DesignLine PIR BUS

JA-112P, Pro DesignLine PIR BUS

Product description

Jablotron JA-112P, Pro DesignLine PIR BUS

The product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect movements of the human body in buildings. Its guaranteed detection coverage is 90 ° / 12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.

In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The JA-191PL hinge holder can be used for special applications such as ceiling mounting or oblique detection angle.

The detector is equipped with impulse activation.

The detector can be used to control programmable PG outputs.

The resistance to false alarms can be set in two levels

The detector offers resistance to white light at the level prescribed by the standard (up to 6000 lux) as standard.

The detector is addressable and occupies one position in the security system.

 

Compatible with F-Link 2.0.0 and above
Power source via the control panel bus 12 V (9 ... 15 V)
Consumption of the current backup (standby) mode: 3 mA
Current consumption for cable selection 11 mA
Recommended installation height 2.2 - 2.5 m above the floor level
Detection angle / detection range 90 ° / 12 m
Sizes: 62 x 110 x 40 mm
Classification safety level 2 / environment class II, in accordance with EN 50131-1 ed. 2 + A1 + A2, EN 50131-2-2
Environment according to EN 50131-1 II. indoor, general
Operational temperature range -10 ° C to +40 ° C
This also meets the requirements of EN 50130-4 ed. 2 + A1, EN 55022, EN 50581

Product reviews Write a review

JA-112P, Pro DesignLine PIR BUS is toegevoegd aan uw winkelwagen!

Maak uw bestelling compleet

Alle foto's