U heeft geen artikelen in uw winkelwagen.
1. The additional microwave sensor filters out possible interference from the air conditioner or moving curtains
2. The device works up to 5 years without having to replace the battery
3. Ignores pets weighing up to 20 kg and height up to 50 cm
Detects human presence due to temperature differences with background heat radiation. The microwave sensor prevents false alarms caused by complex interference.
Designed to function in areas with fireplaces and air conditioning. Detects and ignores drafts, moving curtains and blinds, and flickering, glare and reflection.
Ready to be used immediately. The battery is already installed inside. You do not have to take the detector apart. You can hang it in just a few minutes with the SmartBracket bracket.
Do you have pets and would you like a security system? Then the pet-friendly Ajax MotionProtect motion detector is ideal. The sensor responds when people are present, but ignores pets up to 20 kg and a height of 50 cm. Movements of curtains, vibrations from blinds, drafts, noise from an air conditioner and strong sunlight are also ignored. So you don't have to worry about the alarm system going off continuously. You can monitor the system via the Ajax Security System app on the phone, so that you are always aware of the situation in your home!
With this Ajax alarm system you can go on the road with peace of mind, even if you have pets. The SmartDetect algorithm in the system prevents false alarms from animals under 20 kg and 50 cm high. False alarms are excluded by the use of a FresnelTech optical component. In addition, moving curtains and vibrating blinds are ignored by the advanced radio frequency scan filters. This minimizes the number of false alarms so that you can be better informed about the situation. The Ajax MotionProtect motion detector has a detection range of 12 meters and adjustable control of the response of detectors ensures optimal coverage. The check can be performed every 12-300 seconds (adjustable by yourself).
It is important during installation that the Ajax MotionProtect motion detector PLUS is installed on a vertical surface or in a corner. The ideal height to install the system is 2.4 meters. Keep checking the signal during the installation, so that you can be sure that the Ajax alarm system is in the most optimal position. You can test the quality of the connection and the detection area remotely. In addition, you are immediately connected to the Ajax Hub with one click. Install the MotionProtect PLUS at a minimum of 1 meter and a maximum of 1200 meters, provided there are no walls or obstacles in between, away from the Ajax Hub.
With an Ajax MotionProtect motion detector you are protected against intruders. Are you looking for a different alarm system ? View the range of Ajax motion detectors or our complete range of alarm systems. You can buy Ajax MotionProject motion detectors at Alarmsysteemexpert!
het bereik zou wat verder mogen zijn. verder uitstekend systeem