U heeft geen artikelen in uw winkelwagen.

Smart Hub 12 volt (White) With GSM and LAN Communication

250,50

Smart Hub 12 volt (White) With GSM and LAN Communication

Brand: Ajax Systems
Article number: AJ-HUB12v
Manuals: View manuals
Op voorraad Voor 23:59 besteld, morgen in huis
Op voorraad in showroom Gorinchem
250,50
Incl. tax

Product description

 

Ajax 12V hub

Ajax 12v hub for securing your boat or yacht, for example.

 

In a warehouse

Use the security system with visual alarm verification in buildings without mains voltage or with an unstable power supply. With a 12 V power supply, you can connect hubs and signal amplifiers to low voltage or use a portable battery.
 

In a trailer

Ajax protects your house, even if it is on wheels. Connect the hub to a car or portable battery and let the security system travel with you.
 

On a boat / yacht

Place a SIM card, connect the hub to the network or the battery on board and Ajax ensures that your boat is safe at the pier.

 

Compatibility

The power supply board is compatible with the Hub / Hub Plus / ReX. It is equipped with a standard connection for connecting the power plug and has an additional adapter connection (TA).

 

Installation

The 12 V power supply (PSU) is installed in the housing of the device and replaces the pre-installed 110/230 V power supply.
 
 

Technical specifications

Compatibility
Hub, Hub Plus, ReX
Input voltage
8-20 V DC
Output voltage
4.65 V ± 3%
Switch-on voltage
8 V ± 2.5%
Switch-off voltage
6.9-7.5 V (depending on the load)
Input current
<1 А
Output current
1.5 А
Connection
Socket: 6.5 × 2 mm
Plug: 5.5 × 2.1mm (power plug)
Dimensions
138 × 64 × 13 mm
Weight
30 g
Full set
12V PSU for Hub / Hub Plus / ReX
Adapter (TA)
Quick guide

Hub's intelligent control panel is an important part of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to the owner and the central reporting point.

  • Authentication to prevent counterfeiting
  • Jamming detection and communication channels encoding
  • Tamper alarm
  • Security degree


Central Monitoring Station:
Uses GSM or Ethernet to send alarms to the Central Monitoring Station and the owner
Sends notification in case of power failure and works for up to 15 hours after battery backup
Checks detector functionality at least every 12 seconds

Working principle

The device collects detector operation information in an encoded format, analyzes the data and alerts the system owner and Central Monitoring Station in just milliseconds in the event of an alarm.

Characteristics

The device uses Jeweler radio technology to monitor the detectors and ensure a quick response to danger. It toggles the entire system to clear frequencies while crashing. The device is protected against viruses at the software level.

Installation and configuration

Ready to work right out of the box. It is set up using the mobile application and the detectors are connected with just one click. It can be mounted in just a few minutes using the SmartBracket holder.

Working principle

The device collects detector operation information in an encoded format, analyzes the data and alerts the system owner and Central Monitoring Station in just milliseconds in the event of an alarm.

Characteristics

The device uses Jeweler radio technology to monitor the detectors and ensure a quick response to danger. It toggles the entire system to clear frequencies while crashing. The device is protected against viruses at the software level.

 

Note: excl. Battery

 



 

 

 

 

 

 

 

Product reviews Write a review

Smart Hub 12 volt (White) With GSM and LAN Communication is toegevoegd aan uw winkelwagen!

Maak uw bestelling compleet

Alle foto's