Hub's intelligent control panel is an important part of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to the owner and the central reporting point.
1.Uses GSM or Ethernet to send alarms to the control panel and owner
2.Sends a notification in case of power failure and works for up to 15 hours with the backup battery
3. Checks the functionality of the detectors at least every 12 seconds
The device collects information about the operation of the detector in an encrypted format, analyzes the data and alerts the owner of the system and the control panel in just a few milliseconds in the event of an alarm.
The device uses Jeweler radio technology to monitor the detectors and ensure a quick response in the event of danger. It switches the whole system to clear frequencies during jamming. The device is protected against viruses at the software level.
Installation and setting
Ready to be used immediately. It is set up using the mobile application, and the detectors are connected with just one click. You can hang it in just a few minutes with the SmartBracket bracket.
Differences from the other Hubs:
Automation of a safe home and office
Use Ajax scenarios to not only teach the security system to report threats, but also to actively resist them. Adjust night mode according to schedules, turn office lights off when turned on, program projectors to turn on if outdoor motion detectors detect unauthorized presence, or implement an automatic flood prevention system. The system continues to run scenarios even if the connection to the Ajax Cloud is lost. Click here to learn more about AJAX Scenarios