Is your Jablotron alarm system no longer working properly, is a sensor showing an error, or is your control panel suddenly beeping? There’s a good chance a battery or rechargeable battery needs to be replaced. All Jablotron components require their own specific type of battery or backup battery to continue...
Jablotron batteries and accumulators
Too much choice? Chat or call us at 085-0160316
-
Ultracell SA-214-2.4Ah battery
SA-214-2.4Ah battery Ultracell SA-214-2.4Ah battery maintenance-free rechargeable lead-calcium battery, suitable for ao alarm systems- Maintenance-free rechargeable lead-calcium battery - 12V- 2.4Ah- 0.91kg- 175×33×60mm Lead-calcium batteries are recycled and therefore these products may look used.
-
Alarm SystemExpert.co.uk CR123A Lithium battery
CR123A Lithium batterij 3Volt Suitable for wireless detectors from Visonic, Jablotron, Ajax, among others, and for other alarm sensors. Note, photo is indicative, battery supplied may differ.
-
Jablotron Bat-100 Battery for JA-163A RB, Lithium battery 3.6V 13Ah 1xD
Jablotron Bat-100 battery for JA-163A RB, Lithium battery 3.6V 13Ah 1xDProduct Info
-
Jablotron Bat-3.6V AA
Jablotron Bat-3.6V AA lithium battery, LS 14500 for a.o. the JA-81M magnetic contact
-
Alarm SystemExpert.co.uk Bat-3VO CR2032
CR2032 lithium battery Suitable for the various wireless detectors or remote controls. 3 volts.
-
Ultracell SA-214-7Ah battery
Ultracell SA-214-7Ah Battery Maintenance-free rechargeable lead-calcium SA-214-7Ah battery, suitable for JA-83K and JA-106 central- Maintenance-free rechargeable lead-calcium battery - 12V- 7Ah- 2.03 kg- 151×65×94mm 12V7Ah
-
-
Jablotron BH-80A, Alkaline battery holder for JA-80A and JA-180A
BH-80A, Alkaline battery holder for JA-80A and JA-180A Batteries can be purchased separately here:Batteries The BH - 80A battery holder can accommodate 5 regular alkaline batteries of the 1.5V type (LR14).
-
-
-
Varta AA Battery 1.5V Alkaline High Energy
Varta AA battery 1.5V Alkaline High Energy Suitable for various components from Jablotron etca.
-
-
Varta AAA Battery 1.5V Alkaline High Energy
Varta AAA battery 1.5V Alkaline High Energy Suitable for various components from Jablotron etca.
-
Jablotron UL-18-18Ah battery suitable for JA-83K and JA-106
Jablotron UL-18-18Ah battery Maintenance-free rechargeable lead-calcium Jablotron SA214-18Ah battery, suitable for JA-83K and JA-106 centre- Maintenance-free rechargeable lead-calcium battery - 12V- 18Ah- 5.23 kg- 181×76×167mm 12V/18Ah.
-
-
-
Jablotron Bat-3V6-R20
Jablotron Bat-3V6-R20 lithium battery LSH20 Jablotron Bat-3V6-R20 lithium battery, LSH20 for, among others, the JA-150IR and JA-180IR outdoor detectors
Is your Jablotron alarm system no longer working properly, is a sensor showing an error, or is your control panel suddenly beeping? There’s a good chance a battery or rechargeable battery needs to be replaced. All Jablotron components require their own specific type of battery or backup battery to continue functioning reliably. Below, you’ll find out which type you need, how to identify it, and what to keep in mind when replacing it.
What Are Jablotron Batteries and Rechargeable Batteries?
A Jablotron alarm system consists of a control panel and a series of wireless or wired components, such as Jablotron motion detectors, Jablotron magnetic contacts, and Jablotron sirens and strobe lights. Each of these components has its own power source: the control panel often runs on a rechargeable lead-acid battery as a backup in case of a power outage, while individual sensors and detectors usually run on a small lithium or alkaline battery. Without a properly functioning battery, a component will stop working.
Which battery do you need?
The type you need depends entirely on the Jablotron component you’re replacing:
-
Backup battery for the control panel—for example, the Ultracell SA-214, available in 2.4Ah, 7Ah, and 18Ah, suitable for the Jablotron alarm control panel, among others. The capacity you need depends on the control panel model and the desired backup time in the event of a power outage.
-
Battery for wireless detectors—such as the CR123A 3V lithium battery, suitable for various Jablotron PIR motion detectors.
-
Specific Jablotron batteries for individual components—such as the Bat-3.6V AA for the JA-81M magnetic contact, the Bat-3V6-N170 for the JA-150A, or the Bat-3V6-R20 for Jablotron outdoor detectors.
Not sure which type is right for your component? Check the sticker or the component’s nameplate, or contact us, and we’ll figure it out together.
How does it work?
Just like individual components, your alarm system’s control panel always needs a power source to continue functioning, even if the mains power fails. The backup battery in the control panel then kicks in to keep your system active. With individual detectors and sensors, it works slightly differently: they run entirely on a battery because they’re wireless and therefore don’t have a fixed power connection. When such a battery runs low, the system usually sends a notification via the Jablotron MyJablotron app or the Jablotron control panel, so you can replace it in time before the sensor fails.
Buy Jablotron Rechargeable and Non-Rechargeable Batteries at Alarmsysteemexpert
Not sure which type of battery is compatible with your Jablotron component, or do you want a backup battery for your control panel? Our team is happy to provide the right advice, so you can be sure your system continues to operate reliably. Stop by our showroom in Gorinchem, or contact us by phone or WhatsApp.
Frequently Asked Questions
How often should I replace the battery in my Jablotron control panel?
That depends on the battery type and usage, but a backup battery will typically send a timely alert via the system or the app when replacement is needed. Replace the battery as soon as you see that alert.
Can I use any battery, or does it have to be a Jablotron battery?
For most components, the battery type (e.g., CR123A or 3.6V lithium) is more important than the brand, as long as the specifications match. If in doubt, check the type label on your component or contact us.
Why is my sensor showing a low battery when the system is otherwise working fine?
Wireless sensors automatically report this as soon as the battery voltage drops below a certain threshold, so you can replace the battery in time before the sensor fails.
Are the lead-acid batteries refurbished or new?
Lead-calcium batteries, such as those in the Ultracell series, are recycled, which is why they may sometimes look used. This does not affect their performance.