Products
-
Jablotron100KR Central Wireless LAN
Do you want a SIM card in this alarm system? Then please note: This station does not have 4G!The only network still offering 2G is KPN until April 2025. https://www.alarmsysteemexpert.nl/nl/blogs/blog/uitfaseren-2g/Sim card:It is of course important that your PBX is always...
-
JablotronAC-160-C wireless multifunctional power relay, flush-mounted model
Jablotron AC-160-C wireless multifunctional power relay, flush-mounted modelThe relay can also be installed as an independent device, responding to the activation of unidirectional wireless detectors of the JA-15x series, for example. In this case, the relay is activated according to...
-
JablotronAC-160-DIN Multi-function relay
Jablotron AC-160-DIN Multifunction relay The wireless AC-160-DIN Multifunctional relay is a component of the JABLOTRON 100 system, but can also be installed as a stand-alone device without coupling to a control panel.It provides a switching contact relay with galvanic isolation and safety...
-
JablotronAN-868 External aerial
Jablotron AN-868 External antenna The AN-868 external antenna is used to extend the communication range of wireless components of Jablotron's security systems, which operate on the 868 MHz frequency.A special PIFA type construction not only guarantees very good transmitting characteristics on...
-
JablotronAN-868-2PIN External aerial
Jablotron AN-868-2PIN External aerial The AN-868 external antenna is used to extend the communication range of wireless components of Jablotron's security systems, which operate on the 868 MHz frequency.A special PIFA type construction not only guarantees very good transmitting characteristics on...
-
JablotronAWZ-200 Backup power source 2A
Jablotron AWZ-200 Backup current source 2A- Power supply 230 V AC / 50 Hz - Output power 13.3-13.8 V DC- Transformer power 40 VA- Maximum continuous current 2A (with rechargeable battery)- Maximum output current 3A (peak, with rechargeable battery)- Short...
-
JablotronAWZ-300 Backup power source 3A
Jablotron AWZ-300 Backup current source 3AJablotron AWZ-300 Backup current source 3A- Power supply 230 V AC / 50 Hz - Output power 13.3-13.8 V DC- Transformer power 80 VA- Maximum permanent current 3A (with rechargeable battery)- Maximum output current 5A...
-
JablotronCC-01 Installation cable for JA-100 system
Jablotron CC-01 Installation cable for the JA-100 systemThe Jablotron CC-01 Installation cable for the JA-100 system is designed for easy installation. Cable colours are identical to terminal colours. 300 metres of cable and each metre marked black.- 1 x 2 x...
-
JablotronCC-02 Installation cable for JA-100 system
Jablotron CC-02 Installation cable for the JA-100 systemThe Jablotron CC-02 Installation cable for the JA-100 system is designed for easy installation. Cable colours are identical to terminal colours. 300 metres of cable and each metre marked black.2 x 2 x 24...
-
JablotronCC-03 Installation cable for the JABLOTRON 100 system, with additional wire pair
Jablotron CC-03 Installation cable for the system JABLOTRON 100, equipped with additional pairs of auxiliary conductors Cable CC-03 is used for easy installation of the bus line for the system JABLOTRON 100 with 2 other pairs of auxiliary conductors. 250 Mtr,...
-
JablotronCP-201TB Temperature sensor for TM-201A
Jablotron CP-201TB Temperature sensor for TM-201ATemperature sensor for TM-201A. Temperature sensors CP-201T (2 sensors per package) are designed for universal use in detecting the temperature of liquid, gaseous and solid substances.They can be used to measure the surface temperature of...
-
JablotronCT-01 Shutter detector
Jablotron CT-01 roller shutter detector The CT-01 is wired detector intended to detect the unauthorized movement of external shutters on houses or buildings. This detector is wired and can be connected with JA-150M or JA-81M to continue communication wirelessly.By using...
-
JablotronEi208DW stand-alone CO detector with display
Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector gives excessive carbon monoxide concentration both optically and...
-
JablotronEi208W stand-alone CO detector
Jablotron Ei208W stand-alone CO detectorThis CO detector can be connected to the Jablotron 100 using the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with an...
-
JablotronGS-133 Gas detector 12V
The Jablotron GS-133 is a reliable, high-quality gas detector designed specifically to protect your home or business space from the release of dangerous gas concentrations. This detector efficiently detects the leakage of natural gas (methane) and immediately gives a loud...
-
JablotronGS-208-CO Connection module
Jablotron GS-208-CO Aansluitmodule The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the stand-alone Ei208W or Ei208DW CO detector, which allows the wired connection of the bus to a protection unit or another system.The module provides galvanic...
-
JablotronJA-101KR central Wireless LAN 2G Module
Do you want a SIM card in this alarm system? Then please note: This console does not have 4G!The only network still offering 2G is KPN until April 2025. https://www.alarmsysteemexpert.nl/nl/blogs/blog/uitfaseren-2g/ Sim card:It is of course important that your Central is...
-
JablotronJA-103K control centre with LAN connection
Do you want a SIM card in this alarm system? Then please note: This console does not have 4G!The only network still offering 2G is KPN until April 2025. https://www.alarmsysteemexpert.nl/nl/blogs/blog/uitfaseren-2g/ Sim card:It is, of course, important that your Central is...
-
JablotronJA-103KR central unit with radio module and LAN connection
JA-103KR central unit with radio module and LAN connection The required settings and sizing of the system are programmed using the F-Link software (from version 2.0.0).Sim card:It is of course important that your PBX is always connected to the Internet....
-
JablotronJA-110C PIR with photo camera
Jablotron JA-110C PIR with photo camera The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the security system JABLOTRON 100. The taking of a picture is activated...
-
JablotronJA-110E wired control panel
Jablotron JA-110E wireless control panelThe Jablotron JA-110E is a compact wired code control panel. It can be connected to all Jablotron 100 series control panels.This compact code control panel includes an LCD screen, control buttons and an RFID reader. Integrated on...
-
JablotronJA-110F Bus water overflow detector
Jablotron JA-110F Bus water overflow detectorThe Jablotron JA-110F Bus water overflow detector is used to indicate floods (in basements, bathrooms, etc.). This information is transmitted to the alarm system via the BUS.Product Info
-
JablotronJA-110G-CO Connection module
Jablotron JA-110G-CO Aansluitmodule The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in a standalone Ei208W or Ei208DW CO detector, enabling bus connection to the JABLOTRON 100 system. Product Info
-
JablotronJA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section/output PG activation indicatorThe Jablotron JA-110I BUS section/output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the central unit by BUS. It is not...
