Do you want a SIM card in this alarm system? Then pay attention:
This exchange does not have 4G!
The only network that still offers 2G is KPN until April 2025.
https://www.alarmsysteemexpert.nl/nl/blogs/blog/uitfaseren-2g/
Also make sure that you disconnect the power from the HUB before inserting the SIM card!
hub
Hub's intelligent control panel is an important part of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to the owner and the central reporting point.
1.Uses GSM or Ethernet to send alarms to the control panel and owner
2.Sends a notification in case of power failure and works up to 15 hours with the backup battery
3.Checks the detectors functionality at least every 12 seconds
Working principle
The device collects information about the detector's operation in a coded format, analyzes the data and, in the event of an alarm, notifies the owner of the system and the control panel in just a few milliseconds.
Functionalities
The device uses Jeweler radio technology to monitor the detectors and ensure rapid response to danger. It disables the entire system to clear frequencies during jamming. The device is protected against viruses at the software level.
Installation and setting
Ready to be used immediately. It is set up using the mobile application, and the detectors are connected with just one click. You can hang it up in just a few minutes with the SmartBracket bracket.
Product Info
Automation of a safe home and office
Use Ajax scenarios to teach the security system not only to report threats, but also to actively resist them. Adjust night mode according to schedules, turn off office lights when turned on, program projectors to turn on when outdoor motion detectors detect unauthorized presence, or implement an automatic flood prevention system. The system continues to run scenarios, even if the connection to the Ajax Cloud is lost.
Click here to learn more about AJAX Scenarios
