Modules

The Jablotron JA-190PL Multifunctional installation housing can be used for different modules of the JA-100 system.

The Jablotron JA-110Z-C BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in...

The Jablotron JA-110Z-C BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.

The Jablotron JA-110Z-B BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in...

The Jablotron JA-110Z-B BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62...

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62 x 38 x 20 mm Outside dimensions: 70 x 62 x 35 mm

The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a mul...

The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multicolored LED (red, green, blue and yellow).

This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be di...

This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be divided into two independent bus branches by disconnecting jumpers.

An oversized version of the installation box for Jablotron modules, equipped with a front and a rear tamper switch. Suit...

An oversized version of the installation box for Jablotron modules, equipped with a front and a rear tamper switch. Suitable for input and output modules, nodes etc.

The Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG outpu...

The Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED. It is connected to the control panel by means of a BUS.

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62...

The Jablotron JA-192PL-A Multifunctional installation box for outdoor use. Protection degree: IP65 Inside dimensions: 62 x 38 x 20 mm Outside dimensions: 70 x 62 x 35 mm

The Jablotron JA-110Z Connection Module is designed for branching the bus of the JABLOTRON 100 system. It is protected a...

The Jablotron JA-110Z Connection Module is designed for branching the bus of the JABLOTRON 100 system. It is protected against attack by a pair of tamper contacts. It is supplied in a suitable JA-190PL flush-mounted box. The contact mod...

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W ...

The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, allowing the connection of the bus to the JABLOTRON 100 system.

JA-112M, Bus module for magnetic contacts, 2 inputs

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W...

The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system. The mod...

The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, enabling wireless connection to...

The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, enabling wireless connection to the JABLOTRON 100 system.

The Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BU...

The Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BUS wiring. It is powered by the BUS of the control panel.

The Jablotron JB-111N BUS signal output module PG is designed to provide a switchable output delay (8 A) with a NO or NC...

The Jablotron JB-111N BUS signal output module PG is designed to provide a switchable output delay (8 A) with a NO or NC setting. An appropriate PG output...

The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the outpu...

The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lighting, fans, etc. The relay communicates via the bus and is powered by the con

Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the elect...

Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the electric locks. JA-120N can be used wherever it is difficult to use an external power source for the use of elec...

The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It i...

The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the security system)

The Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module supplies power to t...

The Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module supplies power to the relay output. It can be used, for example, for lighting

The Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/24 V DC). It copies the status...

The Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/24 V DC). It copies the status of a selected PG output of the JA-100 system (PG1 to PG32).

The Jablotron JA-190X PSTN communication module provides central station communication and/or voice messages.

The Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a ...

The Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output of the JA-100 system (PG1 to PG 32).

The Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detecto...

The Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors.